Shop

Secure cargo in vans or enclosed trailers with this heavy-duty E-track ratchet strap. Built for flexibility and strength, it easily anchors to any point along E-track or A-track railshorizontal or verticalmaking it ideal for varied cargo sizes and securement needs.

Constructed from industrial-grade polyester webbing, the strap is abrasion-, tear-, and cut-resistant. It features thicker yarn and a higher pick count than standard options, with heat-sealed ends to reduce fraying. Zinc-coated hardware, including the ratchet, resists rust for reliable use in tough environments.

The spring-loaded E-fittings positively lock into track rails for secure attachment. Straps are color-coded by length: 12′ is yellow, 16′ is gray, and 20′ is bluefor easy sorting during load prep.

The ratchet mechanism allows for high-tension tightening, making it ideal for heavy, bulky, or shifting cargo. Compared to cam buckles, ratchets provide more holding power and a higher working load limit. If you’re hauling fragile goods, consider switching to a cam buckle version to reduce the risk of overtightening.

Available fixed end lengths include 1′, 2′, and the standard 4′. These shorter fixed ends offer better control in tight spaces where ratchet positioning is limited.

Each strap is tagged and stenciled with its working load limit and meets FMCSA and DOT regulations, CVSA and WSTDA guidelines, and North American Cargo Securement standards.

• Heavy-Duty Webbing: Higher-density weave resists wear and maximizes durability.
• Zinc-Coated Hardware: Corrosion-resistant for long-term use in harsh conditions.
• Secure E-Fittings: Spring-loaded ends lock into E-track or A-track rails for a solid hold.
• Ratchet Tightening: Crank-to-tighten design delivers maximum tension for heavy loads.
• Flexible Fixed Ends: Choose from 1′, 2′, or 4′ fixed end lengths to suit your setup.
• Color-Coded by Length: Yellow (12′), Gray (16′), Blue (20′) for quick identification.
• Regulation Compliant: Tagged and stenciled to meet FMCSA, DOT, CVSA, and WSTDA standards.

E-Track Cargo Strap Design Factor

According to the WSTDA, design factor is the “ratio of the breaking strength to the working load limit” and should be 3:1 for these E-track tie down Cargo Straps. This builds in a level of redundancy to account for unknown factors, keeping you, your crew, and those around you safe.

Compatible with E-track and X-track

Learn more about proper load handling and securement in the WSTDA safety bulletins.

California Residents: WARNING