Shop

2″ x 8′ Ratchet Strap with Flat Snap Hooks

This 2″ x 8′ ratchet strap is a staple in the transportation industry and is especially popular for securing cars, motorcycles, and other vehicles. The shorter length paired with flat snap hook hardware makes it ideal for auto tie downs. The polyester webbing is rugged enough for heavy-duty use yet soft enough to help protect your cargo. With minimal stretch, plus UV and water resistance, these straps are built to last. The ratcheting mechanism allows you to easily apply the exact amount of tension neededsomething cam straps cant match.

Quality-Focused Construction

These 2″ tie down straps are designed with a longer fixed end than most standard straps, allowing you to position the ratchet further from the anchor point after wrapping around a rub rail. A sewn loop next to the ratchet provides a convenient way to manage excess webbingjust wrap it up and tuck it in for a cleaner, safer setup.

Industrial-Grade Webbing

The webbing is made with thicker yarn and more picks per inch than many competitors. Each strap end is heat-sealed to prevent fraying. These features add superior resistance to abrasion, tearing, and cutting, giving these straps longer service life under tough conditions.

Corrosion-Resistant Ratchet

The zinc-coated ratchet assembly features a short, wide handle, making it easier to operate in tighter spaces while still allowing secure tensioning.

Flat Snap Hook Hardware

Flat snap hooks are an excellent choice for auto tie downs, easily connecting to axle straps with D-rings. Each hook includes a spring-loaded keeper that closes automatically for a secure connection, ensuring safety and reliability during transport.

Compliant with Industry Standards

All of US Cargo Control’s ratchet straps are tagged and stenciled with the working load limit to meet FMCSA and DOT regulations, CVSA and WSTDA guidelines, and North American Cargo Securement standards.

Learn more about proper load handling and securement in the WSTDA safety bulletins.

Ratchet Use Guidelines

According to the WSTDA (section 4.6.8): “When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation.”

California Residents: WARNING